Polypipe also offers a Staple system that fits directly onto the insulation layer that is laid before a screed or concrete floor is installed. This is a more traditional method of installing underfloor floor heating into a solid/screeded floor.
Staple systems offer a cost effective solution for screeded floors, simply use the staple gun to fix the pipe directly to the insulation boards.
Features & Benefits of using the Staple system
- Cost effective
- Minimum fixing materials needed
Key Design Information
|Typical heat output at 50℃ mean water temperature||76 W/m2 at 200 mm pipe spacing|
|Recommended design flow temperatures||50℃|
|Maximum circuit length||100 mm|
|Maximum coverage per circuit||12 m2 at 100 mm centres |
22 m2 at 200 mm centres