pdf (1.74 MB)
Clip Rail System
Polypipe also offers a Clip Rail system that fits directly onto the insulation layer that is laid before a screed or concrete floor is installed. This is a more traditional method of installing underfloor heating into a solid/screeded floor.
Features & Benefits of using the Staple system
- Provides a guide for pipe spacing
- Can be fixed directly to insulation
Key Design Information
Typical heat output at 50℃ mean water temperature | 76 W/m2 at 200 mm pipe spacing |
Recommended design flow temperatures | 50℃ |
Maximum circuit length | 100 m |
Maximum coverage per circuit | 22 m2 at 200 mm centres 30 m2 at 300 mm centres (18 mm pipe only) |
View Products
Clip Rail System products: 5
Get in touch > Find a stockist > Polypipe Bend 25MM
SKU Code: PB6325
Nominal Size: 25MM
Weight: 0.1168
Length: 300
Width: 30
Colour:
Pack qty: 1
Polypipe Bend Former 25MM
SKU Code: PB6325
Nominal Size: 25MM
Weight: 0.1168
Length: 300
Width: 30
Colour:
Pack qty: 1
Polypipe Clip 49mm
SKU Code: PB02911
Nominal Size: 49mm
Weight: 0.0013
Length: 280
Width: 50
Colour:
Pack qty: 250
Polypipe Clip Rails 1000MM
SKU Code: PB08515
Nominal Size: 1000MM
Weight: 0.1988
Length: 2000
Width: 50
Colour:
Pack qty: 16
Polypipe Edge Expansion 25M
SKU Code: PB05855
Nominal Size: 25M
Weight: 2.3000
Length: 600
Width: 200
Colour:
Pack qty: 1
Polypipe Pipe Clips 49mm
SKU Code: PB02911
Nominal Size: 49mm
Weight: 0.0013
Length: 280
Width: 50
Colour:
Pack qty: 250
Polypipe Rail 1000MM
SKU Code: PB08515
Nominal Size: 1000MM
Weight: 0.1988
Length: 2000
Width: 50
Colour:
Pack qty: 16