Permavoid Biomat Datasheet
pdf (335.1 KB)
Permavoid Biomat - Product code: PV150BM
Permavoid Biomat is a high strength geocellular unit containing a low density, oil treating, geosynthetic floating mat (biomat). The biomat floats on water, intercepting and treating residues or emulsified oils in the surface water. This enhances the oil retention and water treatment capability of the Permavoid attenuation and infiltration system.
Permavoid Biomat units are suitable for use as a stormwater attenuation and/or infiltration system. The system comprises of single, interconnected cells which can be installed in the ground as part of a sub-base formation. Permavoid Biomat is suitable for use in a range of applications including residential, industrial estates, car parks, sports pitches, roofs, basements, pedestrian areas and rainwater harvesting.
The structural load bearing capacity of the Permavoid units has been tested in accordance with the following European Standard: BS 7533-13:2009. The system’s structural design life expectancy, based upon creep test data (tested according to CIRIA guidelines) is as follows; for lightly loaded areas such as car parks a design life of 50 years is achievable. For areas with prolonged HGV loading a typical design life may only be 25 years, depending on the design of the pavement surfacing and structural layers over the tank.
All calculations for Permavoid Biomat units are based upon site-specific load cases, pavement construction types and thickness, soil cover and ground conditions. Suitability must therefore be approved for each project.
Features & Benefits