Ridgidrain Bends

Summary

< Ridgidrain Pipe System - surface water drainage

Ridgidrain Bends are available in 100-600mm diameters, and in a range of radii from 11.25° through to 90°. All bends are BBA, BBA HAPAS and Network Rail PADS Approved. Sizes 750mm and above are available as Ridgistorm-XL. Order seals separately if required, 2 per bend. Some junctions are made to order and subject to lead times. Bends and junctions incorporating other angles not shown below are available as specials.



Literature & technical info

View all
View Products

Ridgidrain Bends products

Get in touch Find a stockist

Filter products

11.25 Degree Bend

CODE NO. Size & length Colour Pack qty BOX QTY
BRD100X11.25 100MM 10 Full details >
Ridgidrain 11.25 Degree Bend 100MM
BRD225X11.25 225MM 1 Full details >
Ridgidrain 11.25 Degree Bend 225MM
BRD300X11.25 300MM 1 Full details >
Ridgidrain 11.25 Degree Bend 300MM
BRD375X11.25 375MM 1 Full details >
Ridgidrain 11.25 Degree Bend 375MM
BRD400X11.25/1 400MM 1 Full details >
Ridgidrain 11.25 Degree Bend 400MM
BRD450X11.25/1 450MM 1 Full details >
Ridgidrain 11.25 Degree Bend 450MM
BRD500X11.25/1 500MM 1 Full details >
Ridgidrain 11.25 Degree Bend 500MM
BRD600X11.25/1 600MM 1 Full details >
Ridgidrain 11.25 Degree Bend 600MM

22.5 Degree Bend

CODE NO. Size & length Colour Pack qty BOX QTY
image BRD100X22.5 100MM 10 Full details >
Ridgidrain 22.5 Degree Bend 100MM
image BRD225X22.5 225MM 1 Full details >
Ridgidrain 22.5 Degree Bend 225MM