Ridgistorm-XL Jointing Frames

The Ridgistorm-XL Jointing Frame is a multi-use tool for assisting the jointing of Ridgistorm-XL ring sealed pipes in sizes 750-1800mm. They assist with the safe jointing of pipes by providing a flat surface for on-site construction machinery to apply a central force to push against, eliminating any damage to the end of the pipes and keeping the joining pipe square to the joint. They are constructed from steel with four built in lifting points for safe handling on-site.

 

Key benefits

 

  • Assist with the safe and correct jointing of pipes
  • Provide a flat surface for on-site construction machinery to apply a central force to push against
  • Eliminate any damage to the end of the pipes and keep the joining pipe square to the joint
  • Can be re-used for other projects of the same pipe diameter

 

Guidance

 

  • The Jointing Frame should be offered up to the end of the pipe, keeping the frame as central as possible
  • Appropriate pressure should be smoothly applied to the central pad in order to push the Jointing Frame and pipe forward
  • Care should be taken to ensure than the pipe and Jointing Frame are clear from any impedance or obstruction that could cause the frame to be overloaded
  • Once the Jointing Frame has been used it should be stored in a safe and dry environment to avoid damage and corrosion
  • For further information please see our Ridgistorm-XL Jointing Frame Installation & Guidance document





Related products

Downloads

View all

Ridgistorm-XL Jointing Frame Installation Guidance


pdf (767.49 KB)

A Four Step Guide to Ridgistorm-XL Pre-Fabricated Component Chambers


pdf (5.67 MB)