This website uses cookies to enhance your experience. By using our site you accept our use of cookies. You can delete and block cookies but parts of our site will not work without them. To find out more about cookies and how to disable them if you wish, please see our privacy notice.
Don't show again
Thermocor CC
Designed to close, damp proof and insulate wall cavities, Thermocor CC is manufactured from an expanded Polystyrene core completely enclosed in Polyethylene DPC for maximum protection against water penetration coupled with maximum insulation.
Standard sizes 50, 65, 75, 90, 100 & 125 mm.
2.44 metre length, in packs of 20. TDI plastic fixing clips are available if required. Can be manufactured up to 200mm wide.
Installation/site work
An overlap of the DPC allows Thermocor CC to be fixed to the frame if required. Expanded Polystyrene is CFC and HFC free to (BS3837).
Thermocor CC can either be fixed as building progresses or placed in the cavity later. Where window frames are built in Thermocor CC should be fastened to window jamb in appropriate position first. Window must be fixed directly to the masonry and set in at least 30mm from the inner surface of the outer leaf of the wall.
