This website uses cookies to enhance your experience. By using our site you accept our use of cookies. You can delete and block cookies but parts of our site will not work without them. To find out more about cookies and how to disable them if you wish, please see our privacy notice.
Don't show again
Standards
- WRAS Approved
- Kitemarked
- BSi FM00318
Introduction
Polyfit is the one step, no nonsense push-click, fully demountable and reusable hot and cold water pushfit plumbing solution. With its unique one-step operation, Polyfit locks tight for a secure fit, combining flexible polybutylene pipes and a wide range of fittings to provide a fast, yet reliable installation.
Advantages
- Fast and simple to install
- Joints can be dismantled reused
- Flexible pipe, reducing the need for fittings and limited joint requirements
- Full range of adaptors enable compatibility with almost any other pipe system
- 25 years guarantee
- Available from 10mm to 28mm diams
NB: Polyfit pipe and fittings must NOT be used for the conveyance of gas.
| Code | Description |
|---|---|
| FIT010 | 10mm Straight Coupler |
| FIT015 | 15mm Straight Coupler |
| FIT022 | 22mm Straight Coupler |
| FIT028 | 28mm Straight Coupler |
| FIT10010B | 10mm x 100 metre Coil |
| FIT10015B | 15mm x 100 metre Coil |
| FIT1010 | 10mm Spigot Elbow |
| FIT1015 | 15mm Spigot Elbow |
| FIT101510 | 10mm x 15mm Spigot Elbow |
| FIT1022 | 22mm Spigot Elbow (not suitable for use with compression fittings) |
| FIT110 | 10mm Elbow |
| FIT1115 | 15mm x 15mm x 10mm Branch Reduced Tee |
| FIT1122 | 22mm x 22mm x 15mm Branch Reduced Tee |
| FIT112210 | 22mm x 22mm x 10mm Branch Reduced Tee |
| FIT1128 | 28mm x 28mm x 22mm Branch Reduced Tee |
| FIT115 | 15mm Elbow |
| FIT12015B | 15mm x 120 metre Coil |
| FIT122 | 22mm Elbow |
| FIT128 | 28mm Elbow |
| FIT1315 | 15mm x 1/2" BSP Wall Plate Elbow |
| FIT1415 | 15mm x 10mm x 15mm End Reduced Tee |
| FIT1422 | 22mm x 15mm x 22mm End Reduced Tee |
| FIT1428 | 28mm x 22mm x 28mm End Reduced Tee |
| FIT15015B | 15mm x 150 metre Coil |
| FIT1515 | 15mm x 10mm x 10mm Branch &?One End Reduced Tee |
| FIT1522 | 22mm x 15mm x 15mm Branch & One End Reduced Tee |
| FIT1528 | 28mm x 22mm x 22mm Branch &?One End Reduced Tee |
| FIT1622 | 15mm x 15mm x 22mm 2 End Reduced Tee |
| FIT1715 | 15mm x 1/2" Bent Tap Connector |
| FIT1815 | 15mm x 10mm Socket Reducer |
| FIT1822 | 22mm x 15mm Socket Reducer (not suitable for use with compression fittings) |
| FIT1828 | 28mm x 22mm Socket Reducer (not suitable for use with compression fittings) |
| FIT182815 | 28mm x 15mm Socket Reducer (not suitable for use with compression fittings) |
| FIT1910 | 10mm Socket Blank End |
| FIT1915 | 15mm Socket Blank End |
| FIT1922 | 22mm Socket Blank End |
| FIT1928 | 28mm Socket Blank End |
| FIT210 | 10mm Equal Tee |
| FIT215 | 15mm Equal Tee |
| FIT215B | 15mm x 2 metre Cut Length |
| FIT2210 | 10mm Nail-In Clip |
| FIT2215 | 15mm Nail-In Clip |
| FIT222 | 22mm Equal Tee |
| FIT2222 | 22mm Nail-In Clip |
| FIT2228 | 28mm Nail-In Clip |
| FIT222B | 22mm x 2 metre Cut Length |
| FIT228 | 28mm Equal Tee |
| FIT2510B | 10mm x 25 metre Coil |
| FIT2515B | 15mm x 25 metre Coil |
| FIT2522B | 22mm x 25 metre Coil |
| FIT2528B | 28mm x 25 metre Coil |
| FIT2615 | 15mm x 15mm Stopcock |
| FIT262015 | 20mm MDPE x 15mm Polyfit Stopcock |
| FIT2622 | 22mm x 22mm Stopcock |
| FIT262522 | 25mm MDPE x 22mm Polyfit Stopcock |
| FIT271012 | 10mm x 1/2" Hand Tighten Tap Connector |
| FIT2715 | 15mm x 1/2" Hand Tighten Tap Connector |
| FIT271534 | 15mm x 3/4" Hand Tighten Tap Connector |
| FIT2722 | 22mm x 3/4" Hand Tighten Tap Connector |
| FIT2822 | 22mm x 10mm  2 Port (Socket/Socket) |
| FIT3115 | 15mm Gate Valve |
| FIT3122 | 22mm Gate Valve |
| FIT315B | 15mm x 3 metre Cut Length |
| FIT322B | 22mm x 3 metre Cut Length |
| FIT328B | 28mm x 3 metre Cut Length |
| FIT3615 | 15mm Spigot Draincock |
| FIT3815 | 15mm x 1/2" Tank Connector |
| FIT3822 | 22mm x 3/4" Tank Connector |
| FIT422015 | 20mm x 15mm MDPE?x PolyFit Adaptor |
| FIT422515 | 25mm x 15mm MDPE?x PolyFit Adaptor |
| FIT422522 | 25mm x 22mm MDPE?x PolyFit Adaptor |
| FIT431012 | 10mm x 1/2" Male BSPT Adaptor |
| FIT4315 | 15mm x 1/2" Male BSPT Adaptor |
| FIT4322 | 22mm x 3/4" Male BSPT Adaptor |
| FIT4328 | 28mm x 1" Male BSPT Adaptor |
| FIT441012 | 10mm x 1/2" Female BSP Adaptor |
| FIT4415 | 15mm x 1/2" Female BSP Adaptor |
| FIT4422 | 22mm x 3/4" Female BSP Adaptor |
| FIT4822 | 22mm x 10mm  4 Port (Socket/Socket) |
| FIT5010B | 10mm x 50 metre Coil |
| FIT5015B | 15mm x 50 metre Coil |
| FIT5022B | 22mm x 50 metre Coil |
| FIT5028B | 28mm x 50 metre Coil |
| FIT5715 | 15mm x 1/2 Flexible Hose Tap Connector" |
| FIT5815 | 15mm x 10mm Reducing Coupler |
| FIT5822 | 22mm x 15mm Reducing Coupler |
| FIT582210 | 22mm x 10mm Reducing Coupler |
| FIT5915 | 15mm x 15mm Shut-Off Valve Warm/Cold |
| FIT6115 | 15mm x 3/4" Appliance Valve Warm/Cold |
| FIT615B | 15mm x 6 metre Cut Length |
| FIT622B | 22mm x 6 metre Cut Length |
| FIT628B | 28mm x 6 metre Cut Length |
| FIT6515 | 15mm x 1/2" Straight Service Valve |
| FIT6815 | 15mm x 1/2" Flexible Hose Tap Connector |
| FIT681534 | 15mm x 3/4" Flexible Hose Tap Connector |
| FIT6822 | 22mm x 3/4" Flexible Hose Tap Connector |
| FIT7115 | 90° Elbow Flexible Hose Connector |
| FIT715 | 15mm x 1/2" Straight Tap Connector (1) |
| FIT71534 | 15mm x 3/4" Straight Tap Connector (2) |
| FIT722 | 22mm x 3/4" Straight Tap Connector (2) |
| FIT7322104 | 22mm x 10mm  4 Port (Socket/Socket) |
| FIT7322153 | 22mm x 15mm  3 Port (Socket/Socket) |
| FIT7515M10 | 15mm x M10 Flexible Polyfit Connector |
| FIT7515M12 | 15mm x M12 Flexible Polyfit Connector |
| FIT8015 | 15mm x 1/2 Flexible Hose Tap Connector" |
| FIT801534 | 15mm x 3/4" Flexible Hose Tap Connector |
| FIT8022 | 22mm x 3/4" Flexible Hose Tap Connector |
| FIT8115 | 15mm x 15mm Flexible Polyfit Connector |
| FIT8122 | 22mm x 22mm Flexible Polyfit Connector |
| FIT8215 | 15mm x 15mm Flexible Polyfit Connector |
| FIT8222 | 22mm x 22mm Flexible Polyfit Connector |
| FIT8315 | 15mm x 1/2" Flexible Hose Tap Connector |
| FIT831534 | 15mm x 3/4" Flexible Hose Tap Connector |
| FIT8322 | 22mm x 3/4" Flexible Hose Tap Connector |
| FIT8415 | 15mm x 1/2" Flexible Hose Tap Connector |
| FIT8422 | 22mm x 3/4" Flexible Hose Tap Connector |
| FIT8515 | 15mm x 15mm Brass c/p Service Valve |
| FIT8522 | 22mm x 22mm Brass c/p Service Valve |
| FIT8615 | 15mm x 1/2" Brass c/p Service Valve |
| FIT8622 | 22mm x 3/4" Brass c/p Service Valve |
| FIT8715 | 15mm x 1/2" Flexible Hose Tap Connector |
| FIT871534 | 15mm x 3/4" Flexible Hose Tap Connector |
| FIT8815 | 15mm x 15mm Flexible Polyfit Connector |
| FIT8915 | 15mm x 15mm Flexible Polyfit Connector |
| FIT910 | 10mm Spigot Blank End |
| FIT915 | 15mm Spigot Blank End |
| FIT922 | 22mm Spigot Blank End |
| FIT9510 | 10mm Spares Component Kit |
| FIT9515 | 15mm Spares Component Kit |
| FIT9522 | 22mm Spares Component Kit |
| FIT9528 | 28mm Spares Component Kit |
| FIT9615 | 15mm x 1/2" Flexible Hose Tap Connector |
| FIT9622 | 22mm x 3/4" Flexible Hose Tap Connector |
| FIT9715 | 15mm x 1/2" Flexible Hose Tap Connector (not suitable for central heating) |
| FIT9722 | 22mm x 3/4" Flexible Hose Tap Connector (not suitable for central heating) |
| FIT9815 | 15mm x 1/2" Flexible Hose Tap Connector |
| FIT9822 | 22mm x 3/4" Flexible Hose Tap Connector |
| FITAID | Set of 4 for 10mm 15mm 22mm and 28mm fittings a useful tool to assist in demounting PolyFit fittings but not essential |
Please refer to our installation guide
NB: Polyfit pipe and fittings must NOT be used for the conveyance of gas.
