Domus

Energy-saving duct systems and extractor fans specifically designed to optimise air flow and energy-efficiency. The largest range of profiles, fittings and mounting components enables ducts to be sized correctly avoiding noise at high air speeds.

Effast

Effast PVCu provides designers and installers with a high quality pressure pipe solution for commercial and industrial installations.

Effast ABS provides designers and installers with a lightweight, rigid and easy to install system which is non toxic and combines chemical resistance with high impact strength.

Flexicon

These robust EDPM flexible rubber couplings are manufactured to BS EN 681-1 and are ideal for jointing pipes for sewerage, drainage and other low pressure applications. Couplings are available as straight connections or adaptors for a wide range of pipe materials and sizes.

Janoplast

Janoplast provides a wide range of electrical ducting for residential, commercial and utilities applications including pre-wired and fire retardant products.

Marshall Tufflex

Marshall-Tufflex rainwater systems are available in a variety of sizes and colours for domestic, commercial and conservatory applications. The new underground system incorporates the latest technology to provide efficient and effective waste water and foul discharge drainage from above ground systems.

MHP

Modular Heating Panels are an exciting new product installation of underfloor heating into suspended floors in both new build and renovation projects.

Overlay™

Overlay is a unique low profile floor heating system ideal for both renovation and new build projects. Installed over the existing floor and only 18mm in depth, Overlay™ allows underfloor heating to be installed where traditional underfloor systems would either require expensive excavation or would require the floor to be raised to an unacceptable level. The Overlay™ system is available in 2 panel types to allow for installation to all build types and floor coverings.

Oracstar

Established for over 25 years Oracstar is the UK's leading distributor of pre-packed plumbing and associated products. Oracstar supplies merchants, retailers and independent hardware stores.

Permafilter

Permafilter is a self-cleaning geotextile membrane that traps pollutants while allowing clean water to pass through its needle-punched surface. It can be used to wrap Polystorm tank structures in attenuation or soakaway applications, creating a habitat for the micro-organisms that feed on trapped oil and remove pollutants through natural digestion.

Permavoid

Charcon Permavoid is a geocellular system designed to provide ground water storage in shallow applications. Although it uses the same modular principal, it is half the depth of Polystorm modular cells, allowing it to be used in areas where excavation is limited by ground conditions or high water table.

Permavoid Bio Mat

A modified Permavoid cell containing a floating mat that first traps fuel and oil deposits, then breaks them down through microbial digestion, Permavoid Biomat is highly effective even against heavy spills. And because it relies on biological processes, it is a self-cleaning, self-sustaining system that gets more effective over time.

Polyduct

Polyduct is a single wall alternative to twin wall cable protection. Manufactured in orange MDPE or HDPE it can be used in either open trench or trenchless applications.

Polyguard

In brownfield developments where traces of organic, inorganic, corrosive or toxic pollutants may still remain below ground, Polyguard offers safety and security from the threat of water contamination. A strong, impact and abrasion resistant pipe, it can be relied on to protect the quality and integrity of mains drinking water in all ground conditions

Polyfit

Polyfit is the one step, fully demountable and reusable pushfit plumbing product, which combines with white polybutylene pipe to create a truly flexible, yet highly secure, plumbing system that is demountable and reusable when required.

Polypipe

Polypipe is one of Europe's foremost brands providing value engineered, fit for purpose piping solutions for the growing diversity and complexity of construction and building technology challenges. Polypipe provides plastic piping systems that enable the effective installation and performance of sustainable building technology, meeting the twin global challenges of carbon reduction and water management.

Polyplumb

Polyplumb provides a quick and permanent integrated plumbing solution utilising durable polybutylene pipes and an easy push-fit connection. Suitable for cold and hot flow and for central heating, Polyplumb has over many years, more than proven its worth

Polystorm

The Polystorm range of lightweight water storage cells provide an efficient and sustainable method of collecting and storing large volumes of water prior to soakaway or release into drains or sewers.

Polysewer

Polysewer is a range of 150 to 300mm uPVC structured wall pipes and fittings for use in gravity sewers. Polysewer is manufactured in accordance with BSI Kitemark Licence Number KM55698 to WIS 4-35-01. The range includes a complete system of couplings, seals, bends, junctions and specialist fabrications.

Polysoak

Polysoak is a pre-wrapped soakaway solution that has been designed to save the installer time and money. The pre-constructed soakaway unit is suitable for draining roof areas of up to 25m2 and is more efficient than traditional granular fill soakaway. It is lightweight and easy to install, ideal for shallow excavation, produces a 95% void ratio for maximum water storage capability and is BBA approved.

Polystorm

Polystorm modular cells combine in an interlocking raft to provide a SUDS compliant water storage, attenuation or soakaway solution. For projects which have high sustainability targets, Polystorm is also available manufactured from recycled materials. Polystorm-R meets the same performance standards as Polystorm.

Polystorm Lite

Polystorm Lite modular cells are designed for light loaded and pedestrianised areas such as shopping centres, parks and sports fields. Because it shares the same interlocking mechanism, it can be combined with Polystorm and Polystorm Xtra in a value-engineered hybrid solution to accommodate a broad range of surface loadings and ground conditions.

Polysure

A complete range of radial press fit fittings and the first available in UK sizes for use with Polyplumb or Polyfit pipes in domestic plumbing applications. Polysure combines the benefits of flexible polybutylene pipe systems with the latest press fit connection technology.

Rainstream

Rainstream is a comprehensive range of rainwater harvesting and re-use systems designed by Polypipe to provide a cost-effective way of integrating a premium quality rainwater harvesting system into most domestic and non-domestic projects.

Rainstream

Polypipe's Rainstream-XL system provides an effective and versatile way to harness rainfall for use in a whole range of non-potable applications. The unique nature of the tank construction means that it can be installed without the need for a concrete surround, or the need to fill the tank with mains water to weight it down during installation - a feature which is unique to the Rainstream system.

Ridgicoil

Ridgicoil is a coiled twin wall cable protection for almost any application. Its flexibility eliminates the need for special bends and the smooth bore has a low co-efficient of friction for ease of cable installation.

Ridgidrain

The very first twinwall drainage system in the UK with Highways Authority Product Approval Scheme (HAPAS) status, Ridgidrain is the complete solution for non-pressurised surface and sub-surface drainage applications. It has a high strength to weight ratio and a flexibility that allows it to resist high traffic loads and settlement without cracking or leaking

Ridgiduct

Ridgiduct is a twin wall system, specifically engineered to provide a light, yet robust alternative to conventional cable protection. Ridgiduct is manufactured in HDPE and the resulting stiff, yet flexible twin wall structure easily outperforms alternative products. Complementing the Ridgiduct range is a selection of twin wall long radius drawn bends, manufactured in HDPE.

Ridgisewer

Ridgisewer is manufactured in accordance with BSI Kitemark Licence Number KM55701to WIS 4-35-01. Ridgisewer features 4 sizes from 400 to 600mm. Manufactured in high strength polypropylene, offering stiffness well in excess of other plastic products and combined with exceptional durability. The range includes a complete system of couplings, seals, bends, junctions and specialist fabrications.

Ridgistorm XL

Ridgistorm XL large diameter plastic pipe can be used to form a robust underground storage tank matching exact project specifications. Value engineered to a precise profile strength and pipe stiffness, it combines exceptional performance with a flexibility that allows it to adapt under settlement and surface traffic loads without loss of structural integrity.

Ridgitreat

Ridgitreat is a semi-permeable membrane used as an outer wrap for Ridgidrain perforated pipe in soakaway applications. It acts as a fine filter against petrol and deposits, capturing them in a microporous mesh and breaking them down through microbial action. It has a high oil retention capacity, making it extremely effective against sudden localised spills.

Silavent

Established in 1958, Silavent is a leading brand of domestic ventilation systems in the UK. Over 40 years of product innovation has brought Silavent a reputation for being at the forefront of the ventilation industry, with a commitment to quality and service.

Storm-X4

A self-contained unit using a four-stage upward filtration process to separate and remove silt, oil and heavy metal pollutants from surface water run-off, Storm-X4 allows water to be treated and cleaned close to source. Its highly effective oil retention unit makes it ideal for car parks and forecourts, where hydrocarbon pollutants are at their most concentrated

Stormcheck

The Stormcheck 'Vortex Flow Control Chamber' comprises of a pre-fabricated plastic chamber in a range of diameters with integral vortex flow control device. The new Stormcheck chamber allows precise control of site discharge rates and when combined with Polypipe's storage systems provides an industry recognised flow attenuation system.

TDI

TDI manufacture a comprehensive range of insulation products designed to provide complete and economical solutions to cold bridging and other insulation issues. TDI lead the way in manufacturing quality products to meet with the ever changing Building Regulations and, where required, these are thoroughly tested for Fire Integrity by Warrington Fire Research.

Terrain

Polypipe Terrain offer a unique combination of above ground drainage, hot & cold water, heating, ventilation and water management systems. This is a single source solution and offers an unrivalled range of products and systems, primarily for commercial buildings such as hospitals, hotels, leisure centre's, sports stadiums, retail complexes, public buildings, offices and apartments - where quality, range and system integrity are of key importance to designers and installers.